收藏!教你2种方法把H3C交换机恢复出厂配置!

方法一

<H3C> reset saved-configuration//清空交换机配置

The saved configuration file will be erased. Are you sure? [Y/N]:y //设备提示保存的配置将会被删除,是否继续。

Configuration file inflash: is being cleared. Please wait...

MainBoard:

(欢迎关注公众号@网络工程师阿龙)

Configuration file is cleared. //配置已被清空

<H3C> reboot//重启交换机

Start to check configuration with next startup configuration file, please wait.........DONE!

Current configuration may be lost after the reboot, save current configuration? [Y/N]:n //设备提示会在重启后丢失当前配置,是否保存当前配置,选择n

This commandwill reboot the device. Continue? [Y/N]:y //设备提示设备将会重启,是否继续,选择Y

Now rebooting, please wait...

(欢迎关注公众号@网络工程师阿龙)

%Dec 14 20:48:39:352 2019 SW1 DEV/5/SYSTEM_REBOOT: System is rebooting now.

方法二

<H3C> dir//通过dir命令查看交换机的文件

Directory of flash:

0 drw- - Dec 14 2019 20:37:24 diagfile

1 -rw- 1554 Dec 14 2019 20:50:06 ifindex.dat

2 -rw- 21632 Dec 14 2019 20:37:24 licbackup

3 drw- - Dec 14 2019 20:37:24 license

4 -rw- 21632 Dec 14 2019 20:37:24 licnormal

5 drw- - Dec 14 2019 20:48:38 logfile

6 -rw- 0 Dec 14 2019 20:37:24 s5820v2_5830v2-cmw710-boot-a7514.bin

7 -rw- 0 Dec 14 2019 20:37:24 s5820v2_5830v2-cmw710-system-a7514.bin

8 drw- - Dec 14 2019 20:37:24 seclog

9 -rw- 6118 Dec 14 2019 20:50:06 startup.cfg //这个是启动的交换机配置,我们要删除此文件

10 -rw- 110464 Dec 14 2019 20:50:06 startup.mdb

(欢迎关注公众号@网络工程师阿龙)

1046512 KB total (1046300 KB free)

<H3C> delete startup.cfg//使用删除命令删除startup.cfg这个启动运行的配置文件

Delete flash:/startup.cfg? [Y/N]:y //设备提示是否要删除,选择Y

Deleting file flash:/startup.cfg... Done. //设备提示startup.cfg这个文件已删除完成

<H3C> reboot//重启交换机

Start to check configuration with next startup configuration file, please wait.........DONE!

Current configuration may be lost after the reboot, save current configuration? [Y/N]:n //设备提示会在重启后丢失当前配置,是否保存当前配置,选择n

This commandwill reboot the device. Continue? [Y/N]:y //设备提示设备将会重启,是否继续,选择Y

Now rebooting, please wait...

主营产品:风机,净化空调